Home made Sarms mk677 tablets with a content of 25mg each?

We already know how to make Sarms into tablets, and today we will learn how to make a tablet containing 25mg of sarms MK677 active ingredients.

Ingredients and Materials

Active ingredient :MK-677(Ibutamoren) raw powder.

Fillers: These are inert substances that make the tablet expand. Common fillers include microcrystalline cellulose (MCC), lactose, or dicalcium phosphate. Today we chose dicalcium phosphate.

Lubricants: prevent sticking to equipment, such as magnesium stearate, talc powder. We chose magnesium stearate.

Additives: Improve powder fluidity, such as colloidal silica.

Home made 25mg mk677 tablets Basic steps 

1. Weight:

Accurately weigh the MK-677 powder to get the total number of tablets you want to produce. For example, if you wanted to make 100 25mg tablets, you would need 2.5 grams of MK-677.

Weigh necessary quantities of fillers, adhesives, disintegrants and lubricants. Now we need to calculate the weight of the filler required. The total weight of the filler and excipient is often much greater than the weight of the active ingredient (MK677 raw powder). For example, if we decide to use 300mg of filler and excipient per tablet, the total weight of the tablet is the total weight of mk677 raw powder and filler.

The active ingredient content of each tablet is now 25mg, and the weight of the filler is 300mg/ tablet. Now we are ready to make 100 Mk677 tablets with a content of 25mg. 2.5g mk677 raw powder has been weighed, and the weight of the filler required is 300mg*100 tablets = 3000mg =30g.

Therefore, we need to prepare a total of 30g of dicalcium phosphate, magnesium stearate and silicon dioxide. The specific distribution is as follows:

Dicalcium phosphate: 28g

Magnesium stearate: 1g

Silica: 1g

2. Mix:

Mix the MK-677 powder with the filler to make the mixture even. This ensures that each tablet contains the same amount of active ingredients. Be sure to mix evenly, in addition, the more you make at a time, the smaller the corresponding error.

In this step, you can choose manual mixing, and if you have conditions, you can choose machine mixing. The more evenly mixed, within a certain range, the larger the quantity produced, the smaller the active ingredient error between each piece.

3. Granulation (optional):

If wet granulation is used, a solvent (such as water or ethanol) is added to the mixture to form particles. This helps the powder bond. After granulation, the mixture is dried.

Dry granulation involves compacting a powder mixture and then grinding it into particles.

4. Compression:

Transfer the final mixture to the tablet press. Set up the press to produce the required size and weight tablets, ensuring that each tablet contains 25mg MK-677.

A small home tablet press can be purchased here (available online) to help make tablets. When using the tablet pressing mechanism, the first few pieces need to be measured to ensure proper hardness, weight and disintegration time.

In addition to the small tablet press, there are some easier manual production machines, as shown below. There are many similar gadgets that can be easily found online.

5. Paint (optional):

Coated Tablets can improve taste, ease of swallowing, or control the release of active ingredients.

The above is an example of 100 tablets MK677 raw powder with a content of 25mg. After mastering the production method, we can also home made Mk677 with a content of 20mg , or make 500 or more tablets at one time. The same method is also useful for other Supplements, like ac262 tablets, lgd4033 tablets, rad140 tablets and so on.